Axis 7100 User Manual Download Page 72

Page: 72 / 181

Configuring the AXIS 7100

AXIS 7100 User’s Manual

Configuring the

RightFax server

Follow the instructions below to set up LPD support on the

RightFax server:

Install an LPD server on the Rightfax server (e.g. the

Windows NT LPD server).

Create a queue on the LPD server.

Connect the queue to the HPFAX printer on the Rightfax
server.

XML DD file for

RightFax Integration

You need to create an XML DD file to prompt the user to enter

the fax number when sending to a fax destination. See

“

Example: RightFax Integration (LPD)

” on page 131 for more

information. Also, refer to the Rightfax embedded codes for a

description of all possible codes in the Output description

section.

Printer Destination for

RightFax

The destination specified in the XML DD file must be set up as a

printer destination:

Click

admin | Destinations | Printer Destination New>>

Enter the destination name specified in the XML DD file e.g.

FAX.

Select the

RightFax

radio button.

Enter the RightFax server name and queue name.

Define a user name to be associated with the LPD print queue.

Select

Windows Queue

(set by default).

For best results, select the Text Low profile (200x200 DPI) from
the drop-down list.

Click

Add To List.

The installation and LPD configuration process is now complete

and you are ready to send a scanned document to a RightFax
destination over LPD.

Summary of Contents for 7100






















































































































































































Search results

Summary of Contents for 7100

Reviews:

Axis 7100, User Manual, Page: 72 / 181

Search results

Summary of Contents for 7100

Reviews: