manualshive.com logo in svg

Axis 7100, User Manual, Page: 166 / 181

Share
Download
Axis 7100 User Manual Download Page 166

 

The Parameter List

 

AXIS 7100 User’s Manual

 

166 

Information level

= Nothing, Basic or Complete Specifies the amount of image information to 

be included with the image. Prints Date, time 
information to the destination printer if the 
value is set to something other than None. See 
also [Clients] InformationLevel.

Server

=IP address or DNS name

Dependent on the destination type, specifies the 
IP address of the FTP server on which the 
scanned image will be stored, or the printer 
destination. 

Resolutions

=75, 100, 150, 200, 300, 
600, 1200

Specifies the resolution settings supported by 
the destination printer.

Paper sizes

=Executive, Letter, Legal, 
Ledger, A4, A3

Specifies the different paper sizes supported by 
the destination printer.

Duplex supported 

=Yes/No

Defines if the printer destination has duplex 
support; i.e. if it is capable of printing on both 
sides of the paper

Duplex selection

=SingleSided, DoubleSided
AsScanned

Defines the printing format for the printer 
destination

LPD Mode

 =SingleDataFile, 
SplitSourceFile, 
BufferDataFiles, 
MultipleDataFiles

Specifies the LPD mode for the printer 
destination 

[Destination-name(SMTP)]
Description

=Descriptive name

Specifies the name of the e-mail destination. 
This is the name that will appear in the 
destination list on the AXIS 7100 message 
display. 

Transfer method

=Scan-to-e-mail (SMTP)

Specifies how the scanned image should be 
sent; i.e. by which protocol. Also used for 
RightFax destinations

Destination

[email protected]

Defines the E-mail address of the e-mail 
recipient (SMTP).

Profile

=Text

[Subjects]
Clear List First

=no

Subjects:

=1

Subject0:

Subject-A Scanned Image

[Subject-A Scanned Image]
Description

A Scanned Image

Specifies the text that will be used in the subject 
field when scanning to e-mail destinations.

[Profiles]

Parameter name

Value

Description

Summary of Contents for 7100






















































































































































































Reviews:

No comments