Axis 7100 User Manual Download Page 12

Page: 12 / 181

Physical Description

AXIS 7100 User’s Manual

Section 2

Physical Description

This section provides a physical description of the AXIS 7100

and explains the purpose and function of the unit connectors,
indicators and user interface.

The Back Panel

Push Button

The Push button can be used for restoring the AXIS 7100

parameters to the factory default settings. See “

Restoring Factory

Default Settings

” on page 139.

Parallel Port Connector

A 25-pin parallel port connector (IEEE 1284 DSUB) for

connection to a WORKiO copier.

Network Connector

The AXIS 7100 is designed for 10 Mbps Ethernet and 100 Mbps

Fast Ethernet networks (10baseT and 100baseTX) and connects

to the network via an RJ-45 connector, via twisted pair category
5 cable. Auto-sensing allows the AXIS 7100 to vary the speed of

data communication from 10 Mbps to 100 Mbps according to

the local network segment.

Keyboard Connector

A Mini-DIN connector for connection of a standard PC
compatible keyboard.

Power Supply

AXIS PS-E power supply

Parallel Port

Keyboard

Power supply

Push button

Connector

Network

Connector

Summary of Contents for 7100






















































































































































































Search results

Summary of Contents for 7100

Reviews:

Axis 7100, User Manual, Page: 12 / 181

Search results

Summary of Contents for 7100

Reviews: