manualshive.com logo in svg

Axis 7100, User Manual, Page: 117 / 181

Share
Download
Axis 7100 User Manual Download Page 117

 

AXIS 7100

 

User’s Manual

Meta Information

117

2.

The user is prompted to enter the name of the document and 

then press 

Enter

. The star indicates that this is required Meta 

Information and that the user can not scan and send a 
document without entering the requested information.

3.

The user is prompted to enter the name of the person who 
issued the document. This information is not required and can 

be ignored by pressing 

Menu

.

Note:

4.

The user is prompted to enter the version number of the 

document. This information is not required and can be ignored 

by pressing 

Menu

.

5.

The user is prompted to enter the level of importance by which 

the document is to be archived. The specified default value 
appears in the display. Using the UP/Down arrows the other 

values can be selected.

Doc Name: 

 

.

*

Doc Issuer:

The 

Menu

 button scrolls through the list of Meta Information. The 

Enter

 

button validates the entered information against the pattern defined in 
the XML DD file.

Doc Version:

Doc Importance:
Medium

Summary of Contents for 7100






















































































































































































Reviews:

No comments