manualshive.com logo in svg

Axis 7100, User Manual, Page: 161 / 181

Share
Download
Axis 7100 User Manual Download Page 161

 

AXIS 7100

 

User’s Manual

The Parameter List

 

161 

[SNMP]
GetCommunityName

= public

Specifies the community that has read only 
access to all supported SNMP objects except 
WriteCommunity, SupervisorPassword and 
ftpPassword. It corresponds to the 
ReadCommunity SNMP object.

TrapDestination

= 0.0.0.0

Specifies the IP Address which SNMP traps are 
sent to. It corresponds to the TrapAddress 
SNMP object. Default is 

0.0.0.0

, which means 

that all SNMP traps are disabled.

TrapCommunityName

= public

Specifies the community for all generated SNMP 
traps. It corresponds to the TrapCommunity 
SNMP object. 

SystemContact

=

Optional entry which should be in plain text and 
may be used to show the name of the system 
contact person.

SystemName

=

Optional entry which should be in plain text and 
may be used to show the name of the system.

SystemLocation

=

Optional entry which should be in plain text and 
may be used to show the location of the system.

AuthenticationTrap

= disabled

Enables or disables the SNMP authentication 
failure traps. It corresponds to the 
snmpenableAuthenTraps (MIB-II) SNMP object.

[Clients]
InformationLevel

= Basic

Specifies the default amount of information to 
be transmitted with a scanned image. If not set 
for a destination, this setting will be used. Valid 
values are 

Nothing, Basic 

or 

Complete. Basic

 

includes information about the AXIS 7100, the 
connected digital copier/scanner, the parameter 
settings used when scanning etc. 

Complete

 also 

includes the image-related profile settings.

FTPDefaultUser

= anonymous

If not set for a destination, this username will 
be used.

FTPDefaultPassword

= [email protected]

If not set for a destination, this password will be 
used. This field can also contain the identity of 
the user transmitting the scanned image. This is 
useful for administrative purposes.

FTPDefaultFileName

= img%3i.%e

If no file name has been assigned to the 
transmitted file, this name will be used. In the 
default file name, 

img%3i.%e, %3i 

means a 3-

digit number and

 %e

 means the file extension, 

e.g.

 img001.tif

Parameter name

Value

Description

Summary of Contents for 7100






















































































































































































Reviews:

No comments