manualshive.com logo in svg

Axis 7100, User Manual, Page: 42 / 181

Share
Download
Axis 7100 User Manual Download Page 42

Configuring the AXIS 7100

 

AXIS 7100 User’s Manual

 

42

 

Authentication

The authentication option makes it possible for the administrator 

to allow access to the AXIS 7100 to authenticated users only. 

For more information, please refer to “

Specifying Authentication 

Settings

”  on page 56.

International

Allows the 

Administrator(s)

 to select:

• The preferred language for messages displayed on the 

AXIS 7100 control panel display - English, French, 

German, Spanish, Italian and Swedish are supported

• The keyboard layout which is compatible with the 

external keyboard

• The measurement unit to be used for displaying defined 

paper sizes (centimeters or inches)

Notes:

Meta Information

Meta Information handling enables the administrator to request 
information from the user of the AXIS 7100. This information is 

requested using an XML DD file. The user is prompted to enter 

the information at the moment of scanning, using the connected 
keyboard. For more information, please refer to “

Meta 

Information

”  on page 108.

• The language default is set to English and the measurements to 

inches.

• When a new language is selected you must go back to the 

Profiles

 

page and click 

Restore Predefined Profiles

 to change the language in 

the Profile Name list. This also applies to the language in the Paper 
Sizes list, i.e. you must go back to the 

Paper Sizes

 page and click 

Restore Predefined Paper Sizes

.

Note: All user-defined profiles and modifications to predefined profiles 
will be lost when you click Restore Predefined Profiles.

Summary of Contents for 7100






















































































































































































Reviews:

No comments