Axis 7100 User Manual Download Page 76

Page: 76 / 181

Configuring the AXIS 7100

AXIS 7100 User’s Manual

Paper
Orientation

• Portrait: top along the

short edge

• Landscape: top along the

long edge

Click the appropriate radio button
to specify your chosen orientation.

Multipage
Documents

• All pages in one file
• Separate file for each page

Click the appropriate radio button
to select whether multipage docu-
ments should be saved in one mul-
tipage image file or separated into
one image file per page.

Note: Not all TIFF viewers support
multipage image files.

Resolution

Specify the resolution to be used
for scanning in dots per inch (DPI).

Note: Higher-resolution settings
produce higher-quality scanning.
However, your documents might
take longer to scan.

Intensity

0 - 100 (%)

Enter the level of intensity as a
percentage ratio

Contrast

0 - 100 (%)

Enter the level of contrast as a
percentage ratio.

Note: The contrast is the tonal gra-
dation between the highlights,
mid-tones and shadows in an im-
age.

Data Type

• Black and White

Select data type depending on the
material you are scanning and the
imaging application you intend to
use.

Parameter
Name

Options

Instructions

Summary of Contents for 7100






















































































































































































Search results

Summary of Contents for 7100

Reviews:

Axis 7100, User Manual, Page: 76 / 181

Search results

Summary of Contents for 7100

Reviews: