manualshive.com logo in svg

Axis 7100, User Manual, Page: 15 / 181

Share
Download
Axis 7100 User Manual Download Page 15

 

AXIS 7100

 

User’s Manual

Physical Description

 

15

 

Cancel

The Cancel key 

 cancels the sending process at any stage 

and clears any selections made from the menu. It also resets 

error messages on the display.

Menu

The Menu key 

 scrolls the menu.

Select

The Select key 

 selects multiple destinations.

Send

The Send key 

 sends the scanned material to the selected 

destination(s) and releases the AXIS 7100 for other users. For a 
single page/stack of sheets, use this key to scan the material and 

send the image in one step.

Up/Down

The Up 

 and Down 

 keys scroll and select menu options.

User Key

Combinations

Advanced Settings

Menu

Pressing and holding the Menu key 

 while simultaneously 

pressing the Select key 

 displays the 

Advanced menu

.

Up/Down

Use the Up 

 and Down 

 scroll keys to select:

•

Event  Log

•

Firmware version number

•

Network  settings

Select

Use the Select key 

 to enter the sub menu.

Summary of Contents for 7100






















































































































































































Reviews:

No comments