Axis 7100 User Manual Download Page 105

Page: 105 / 181

AXIS 7100

User’s Manual

Using the AXIS 7100

105

Notes:

Viewing Image Files

The AXIS 7100 generates standard TIFF and PDF formats that
are supported by most image-related applications; and PCL

format, that is supported by most printers.

Although the AXIS 7100 does not rely on any product-specific

software installed on each client, tools for viewing and

manipulating the images are required.

There are basically two different types of imaging tools:

•

Tools optimized for image/picture editing

•

Tools optimized for handling scanned documents

Tools for Image/Picture

Editing

Most tools will work, as long as TIFF formats are supported.

• By scanning multiple pages, you can accumulate several pages into

one image file. See “

Multipage Image Files

” on page 93.

• You must press the

Add

button or the

Send

button on the control

panel within 5 minutes. Otherwise, the operation will be executed
automatically.

• The

Reserve Scanner

function is not available when Authentica-

tion is enabled.

Summary of Contents for 7100






















































































































































































Search results

Summary of Contents for 7100

Reviews:

Axis 7100, User Manual, Page: 105 / 181

Search results

Summary of Contents for 7100

Reviews: