5 – 1 4 0
040 7448 329657 (04.97) PC-SW 4.5
C H A P T E R 5 : C O M M A N D S
VOL(UME)
Description:
With the VOLUME command, the attenuation of the audio out-
put “active loudspeaker” (Sp) can be set, provided the audio
mode 1 is selected. The attenuation lies between 0 and 90 dB
and is given in 1.5-dB steps. The factory setting is step 4, an
attenuation of 6 dB (corresponds to 4 x 1.5 dB).
Command:
^B
VOL
[/
Parameter 1] <cr>
Response:
^P
VOL <cr>
- Command executed -
^P
VOL <^N>
1
<^N>
1
<cr>
- Syntax error -
^P
VOL <^N>
1
<^N>
2
<cr>
- Command not executable -
Parameter 1:
Attenuation (in dB) of the active loudspeaker output divided by
1.5
“xx”
Number between 0 and 63
WAR(MSTART)
Description:
The WARMSTART command activates a system warmstart.
Command:
^B
WAR
/
<cr>
Response:
^P
WAR <cr>
- Command executed -
^P
WAR <^N>
1
<^N>
1
<cr>
- Syntax error -
^P
WAR <^N>
1
<^N>
2
<cr>
- Command not executable -
Remark:
This command has the exactly the same function as RESET. It
has been included only for reasons of compatibility with CLI
commands.
X21_CON(NECT)
Description:
Connection set up for X.21 mode 3 (no dialling)
Command:
^B X21_CON
/
<cr>
Response:
^P X21_CON <cr>
- Command executed -
^P X21_CON <^N> 1 <^N> 1 <cr>
- Syntax error -
^P X21_CON <^N> 1 <^N> 2 <cr>
- Comm. not executable -
Summary of Contents for Titan
Page 1: ...TITAN Videocodec ISDN Videocodec Operator Manual ...
Page 2: ...T I T A N V I D E O C O D E C I S D N V I D E O C O D E C O P E R A T O R M A N U A L ...
Page 7: ...040 7448 329657 04 97 PC SW 4 5 ...
Page 147: ...8 153 040 7448 329657 04 97 PC SW 4 5 C H A P T E R 8 F A C T O R Y S E T T I N G S ...
