AVT Titan, Operator'S Manual

Page: 133 / 202

5 – 1 3 9 040 7448 329657 (04.97) PC-SW 4.5
C H A P T E R 5 : C O M M A N D S
V(IDEO)OUT
Description: The VIDEOOUT command selects the output of the motion vi-
deo codec, the graphics codec or the input of the motion video
codec as the source for the background or the PIP of the sel-
ected video output. The “Preview” source can be selected only
for the background, and a PIP is not possible for this video out-
put. The signal types CVBS or RGB can be selected for the
outputs of both the motion video codec and the graphics co-
dec, depending on the set mode. For the preview, only the si-
gnal type CVBS can be selected (see remark).
Command: ^B VOU / Parameter 1 / [Parameter 2] / Parameter 3 <cr>
Response: ^P VOU <cr>
- Command executed -
^P VOU <^N> 1 <^N> 1 <cr>
- Syntax error -
^P VOU <^N> 1 <^N> 2 <cr>
- Command not executable -
Parameter 1: Source for the background
F selects the output of the motion video codec as
source
S selects the motion video transmit picture as source
G selects the output of the graphics codec as source
P selects the video output of the preview as source
Parameter 2: Source for the PIP (Picture in Picture)
F selects the output of the motion video codec as the
PIP source
S selects the motion video transmit picture as the
PIP source
G selects the output of the graphics codec as the PIP
source
– deactivates the PIP
Parameter 3: Selection of the video output
CH 1 selects CVBS 1 as video output
CH 2 selects CVBS 2 as video output
CH 3 selects CVBS 3 (R) as video output – only Mode 2
CH 4 selects CVBS 4 (G) as video output – only Mode 2
CH 5 selects CVBS 5 (B) as video output – only Mode 2
CH 6 selects CVBS 6 (S) as video output – only Mode 2
RGB selects RGB as video output – only Mode 1