AVT Titan, Operator'S Manual

Page: 89 / 202

3 – 8 9 040 7448 329657 (04.97) PC-SW 4.5
C H A P T E R 3 : O P E R A T I O N W I T H A P C
3.3.9.5 SET DEFAULT ON BOARD
The default configuration is always loaded when the TITAN videocodec is
switched on. The configuration that is to be stored as the default configuration
can be selected. To do this, set the required parameters and store this confi-
guration in the videocodec system with the “SAVE ON BOARD” function (see
SECTION 3.3.9.4). Then click the “SET DEFAULT ON BOARD” menu item in
the CONFIG pull-down menu. The following dialogue window appears:
Enter the memory location of the configuration that you want to use as default
configuration.
Note Since during the boot process, there is not yet a connection to
the PC, the default configuration must be stored in the system
(“on board”).
3.3.9.6 FACTORY SETTINGS
Click the “Factory settings” menu item in the CONFIG pull-down menu to load
the factory setting into the current unit configuration.