3 – 7 9
040 7448 329657 (04.97) PC-SW 4.5
C H A P T E R 3 : O P E R A T I O N W I T H A P C
SIG
There is a SIG key next to every video output socket. This calls up a window
with which the required signal for this output socket can be selected:
The following signals can be selected:
An inconsistent setting such as the switching through of the RGB signals to an
output of type CVBS (FBAS) is not possible.
Exit the selection window by clicking CLOSE (the setting is not changed). The
selected setting is displayed in the VIDEO INTERFACES window above the
socket. The abbreviations used are explained in TABLE 3.7.
TABLE 3.7
VIDEO SIGNALS AT THE OUTPUT SOCKETS
Setting
Name
Meaning
OFF
OFF
Video output switched off
MOTION VIDEO CODEC
MPC
Motion video codec signal at video output
GRAPHICS CODEC
GRC
Graphics codec signal at video output
RGB-INPUT
RGB-IN
RGB input sockets switched through to
RGB output sockets
a
a
Functions only if the signal type RGB has been set for the output socket. All four sockets
(R, G, B and SYNC) are switched together
CVBS1-INPUT
CVBS1-IN
The CVBS input socket is switched through to
the selected CVBS output socket
b
b
Functions only if the signal type CVBS has been set for the output socket
CVBS2-INPUT
CVBS2-IN
CVBS3-INPUT
CVBS3-IN
CVBS4-INPUT
CVBS4-IN
CVBS5-INPUT
CVBS5-IN
CVBS6-INPUT
CVBS6-IN
5+)
Summary of Contents for Titan
Page 1: ...TITAN Videocodec ISDN Videocodec Operator Manual ...
Page 2: ...T I T A N V I D E O C O D E C I S D N V I D E O C O D E C O P E R A T O R M A N U A L ...
Page 7: ...040 7448 329657 04 97 PC SW 4 5 ...
Page 147: ...8 153 040 7448 329657 04 97 PC SW 4 5 C H A P T E R 8 F A C T O R Y S E T T I N G S ...