5 – 1 2 0
040 7448 329657 (04.97) PC-SW 4.5
C H A P T E R 5 : C O M M A N D S
CE(NSUS)
Description:
CENSUS is used to switch hardware units on or off with regard
to the software configuration after the next system boot.
Example: If there is no graphics codec inserted in the TITAN
system, the alarm “No communication with Graphics board” is
meaningless and should be suppressed. The command “CEN
GRAPHIC OFF” is entered to achieve this. If a graphics codec
is later inserted, then “CEN GRAPHIC ON” should be entered.
Command:
^B
CE
/
Parameter 1 [Parameter 2] <cr>
Response:
^P
CE <cr>
- Command executed -
^P
CE <^N>
1
<^N>
1
<cr>
- Syntax error -
^P
CE <^N>
1
<^N>
2
<cr>
- Comm. not executable -
Parameter 1:
R
Checks which units are present in the system
a
a
This parameter is only useful in the terminal mode. This generates a list of all PCBs (plug-
in units) in the system with the exception of the power supply.
VIDEO
Motion video codec
GRAPHIC Graphics codec
VCB
Video crossbar
EC
Echo cancellation
Parameter 2:
ON
Unit installed
OFF
Unit not installed
COL(OR)
Description:
No function. Implemented for compatibility with CLI.
Summary of Contents for Titan
Page 1: ...TITAN Videocodec ISDN Videocodec Operator Manual ...
Page 2: ...T I T A N V I D E O C O D E C I S D N V I D E O C O D E C O P E R A T O R M A N U A L ...
Page 7: ...040 7448 329657 04 97 PC SW 4 5 ...
Page 147: ...8 153 040 7448 329657 04 97 PC SW 4 5 C H A P T E R 8 F A C T O R Y S E T T I N G S ...
