AVT Titan, Operator'S Manual

Page: 53 / 202

3 – 5 3 040 7448 329657 (04.97) PC-SW 4.5
C H A P T E R 3 : O P E R A T I O N W I T H A P C
The SELECT CONFIGURATION key is used to assign a (previously stored)
unit configuration to a calling number block. This has the advantage that for a
specific partner, the correct interface, the correct positioning of the PIP, etc.
are automatically selected, obviating the need to repeat these settings every
time this partner is called. If the SELECT CONFIGURATION key is clicked, the
dialogue window shown below appears:
In the Dirs/Files selection window, click the name of the required unit configu-
ration. Confirm with Select
1
.
Note It must be ensured that the configuration file is valid for a later
calling up of the entry. For this reason, the directory from which
the program was called is the only allowable directory for the
storing of configuration files.
If you do not want to load a configuration, you can abort the entry with Cancel,
which returns you the NUMBER Panel, where you can save the number block
with the SAVE NUMBER key. The CLOSE key terminates the entry and the
CALL-Panel is displayed.
Warning CLOSE does not store the entered data. Store the configura-
tion with SAVE NUMBER, before you exit the NUMBER Panel!
Always exit the program with QUIT before you switch off the
PC, in order to close the calling number file correctly. If this is
not done, it is possible that the stored calling numbers can no
longer be read in.
1 Alternatively, the entry can be selected by double-click (pressing the left mouse key rapidly twice in succession)
!