AVT Titan, Operator'S Manual

Page: 56 / 202

3 – 5 6 040 7448 329657 (04.97) PC-SW 4.5
C H A P T E R 3 : O P E R A T I O N W I T H A P C
3.3.3.8 SEARCH NAME
The SEARCH NAME function offers the possibility of searching for a specific
name. This is particularly useful if the number of names in the calling number
list is very large. Click the SEARCH NAME key to open an entry window in
which the text to be searched for can be entered. Confirm your entry with OK.
In the selection list, the horizontal bar is placed on the first entry that contains
the search text. If the search text is not found, a fault message appears.
3.3.3.9 SEARCH NUMBER
The SEARCH NUMBER function is identical with the SEARCH NAME
function (see above) except that it offers the possibility to search for a calling
number.
3.3.3.10 SEARCH NEXT
If several entries contain the search text, you can use the SEARCH NEXT key
to display the next number block that contains the search text. If SEARCH
NEXT is activated, the last search command is repeated (either Search Name
or Search Number).
3.3.3.11 GLOBAL CALL
If DISTRIBUTION is selected as network interface in the LINE panel (see
SECTION 3.3.8.1), a different panel appears from the usual one when the
CALL! is clicked (see following figure). The GLOBAL CALL key can then be
used to simultaneously call more than one destination with two B-channels
each.
All partner stations then receive the same transmitted audio and video data.
The SELECT key is used to select the partner stations.
Clicking a PARTNER button activates the CALL panel. SELECT can then be
used to assign the PARTNER button to a specific entry in the calling number
list. INACTIVE can be used to deactivate the assignment.
5'#4%* 0#/'
5'#4%* 07/$'4
5'#4%* 0':6
).1$#. %#..