AVT Titan, Operator'S Manual

Page: 179 / 202

A 1 2 – 1 8 5 040 7448 329657 (04.97) PC-SW 4.5
A N N E X E 3 : O N S C R E E N D I S P L A Y ( O S D ) O P T I O N
Note If the GRAPHIC MONITOR switch in the SETUP menu is set
to NO, then the selection of an item in the GRAPHIC menu
leads to an automatic exiting of the OSD function. The output
of the graphics codec is displayed as the background picture
on the monitor. For a single monitor system (one monitor for
motion video and graphics at CVBS1-OUT) this setting is con-
venient, since if the graphics picture is being modified, the gra-
phic picture is switched to immediately.
Note If the GRAPHIC MONITOR switch in the SETUP menu is set
to YES, the OSD is not exited when the SHOW GRAPHIC
function is selected. This setting is convenient for a two-moni-
tor system (one monitor for motion video at CVBS1-OUT and
one monitor for graphics e.g. RGB-GRAPHICS-monitor at
RGB-OUT or CVBS-graphics monitor at CVBS2- OUT), since
in this case, the OSD does not have to be exited in order to dis-
play the graphics picture.
A12.9 SETUP menu
FIGURE A12.15 SETUP MENU
GRAPHIC-MONITOR: This is used to set whether the system includes a se-
parate graphics monitor or not.
NO: There is no separate graphics monitor. When a graphics
function is activated, the OSD is exited and the graphics pic-
ture is displayed as background on the motion-video monitor.
YES:
There is a separate graphics monitor (in addition to the mo-
tion-video monitor). When a graphics function is activated, the
display on the motion-video monitor does not change.
MOTION-VIDEO-SOURCES: This is used to enable motion-video codec
sources for the camera-select function in the CAMERA menu. Only the video
sources enabled here can be selected from in the Camera menu of the mo-