AVT Titan, Operator'S Manual

Page: 64 / 202

3 – 6 4 040 7448 329657 (04.97) PC-SW 4.5
C H A P T E R 3 : O P E R A T I O N W I T H A P C
Select the microphone being used from the list by clicking the name and then
the SELECT key
1
If the microphone that is being used is not in the list, exit the selection window
with the CLOSE key and click the UNKNOWN MICROPHONE key
The window displays the message that the calibration will be carried out on
the basis of the set output level only. Click SELECT to activate the UNKNOWN
MICROPHONE function. The window to set the microphone type is displayed
on the screen. The microphone type is UNKNOWN.
The calibration of the echo cancellation can now be started. Click START CA-
LIBRATION, and wait until “Calibration ended” appears in the status line.
Warning It is very important that the room is quiet during the calibration
(until the “Calibration ended” message appears).
The calibration of the echo cancellation is now completed. The levels set du-
ring the calibration are displayed in the Audio panel.
Warning If you want to change the level settings after you have calibra-
ted the system, you should do so only with the controls provi-
ded in the PC user interface (or the operator panel). These le-
vel settings are then automatically taken into account by the
echo canceller.
Do not change the settings of the external audio system!
1 The name can also be selected by double-clicking.
!
!