AVT Titan, Operator'S Manual

Page: 30 / 202

2 – 3 0 040 7448 329657 (04.97) PC-SW 4.5
2 P U T T I N G T H E S Y S T E M I N T O O P E R A T I O N
2.1 Mounting the TITAN videocodec
With its dimensions of 439 mm
×
133 mm (3 HE)
×
395 mm (W
×
H
×
D), the
TITAN can either be operated as a table-top device or be inserted into 19" or
ETSI racks using mounting brakkets.
The dimensions given above are valid for the table-top version with neither
mounting brackets nor feet. If the TITAN videocodec is to be inserted into a
rack, it should be remembered that the bending radius of the cables should
always be greater than the minimum allowed value.
If the TITAN videocodec is installed in a rack, it should also be ensured that
sufficient ventilation is provided. It is recommended that at least 3 cm space
is left next to the openings. If it cannot be avoided a maximum of one of the
ventilation holes can be blocked (front or side). As a rule, the ambient tempe-
rature should not lie outside the range +5
°
C to +40
°
C. These limits are of par-
ticular importance if the TITAN videocodec is inserted in a rack.
During operation, the humidity must lie between 5% and 85%. Operation of
the TITAN videocodec outside the above-mentioned limits is not allowed and
invalidates the warranty (guarantee).
2.2 Connection to the video interfaces
The sockets for the video inputs of the TITAN videocodec can be assigned to
different signals (see SECTION 1.2.3).
All video sockets are BNC sockets and can be connected with commercially
available BNC plugs.
For the pin assignment, please see SECTION 1.5.2.
2.3 Connection to the audio interfaces
Professional XLR sockets have been provided as audio sockets for micropho-
nes and line inputs and outputs. Cinch sockets have been provided for the re-
corder, telephone and loudspeaker. For the pin assignment and availability of
the interfaces, please see SECTION 1.5.1.