AVT Titan, Operator'S Manual

Page: 48 / 202

3 – 4 8 040 7448 329657 (04.97) PC-SW 4.5
C H A P T E R 3 : O P E R A T I O N W I T H A P C
3.3.2.3 COM PORT CONFIGURATION Panel
The COM PORT menu item calls up the COM PORT CONFIGURATION pa-
nel. The PC serial interface for the control of the codec can be selected here.
This interface is automatically used for the control the next time that the pro-
gram is started
1
.
Note The settings are saved in the PC only after the SAVE SET-
TINGS key is clikked.
Under REMARKS, you can enter some information specific to the interface,
such as its use, for example.
The slide switches BAUD RATE and PARITY set the Baud rate and parity of
the connection between PC and TITAN. 19200 Baud / no parity (the default
setting) is recommended.
Warning Please ensure that the set values correspond to the values set
in the TITAN videocodec (see SECTION 4.4).
Use the MODEM DIALLING switch to enable or disable modem dialling (for
remote control). Remote control via modem is described in CHAPTER 7.
1 Independent of this setting, the program can be started with
titan /n
for the interface n.
!