AVT Titan, Operator'S Manual

Page: 75 / 202

3 – 7 5 040 7448 329657 (04.97) PC-SW 4.5
C H A P T E R 3 : O P E R A T I O N W I T H A P C
3.3.6.2.7 GRAPHIC OPERATIONS
Click the GRAPHIC OPERATIONS key to open a window that provides trans-
fer and conversion operations for graphics files.
SEND FILE TO GRC
Click the SEND FILE TO GRC key to load a JPEG picture from the PC into the
graphics codec. The picture can then be transferred to the remote end with
the command JPEG FILE TRANSFER (SECTION 3.3.6.2.8). The JPEG pic-
tures must be pictures encoded in the Baseline mode with the format
720
×
576.
ERASE FILE
The ERASE FILE key is used to delete stored files.
GET FILE FROM GRC
Click the GET FILE FROM GRC key to display a window with which you can
load a JPEG picture from the graphics codec into the PC. “Get Snapshot Pic-
ture” is used to convert the current camera picture into JPEG format and load
it into the PC (frame-grabber function). Similarly, “Get Receive Picture” is
used to load the picture received from the far end into the PC.
CONVERT FILE
CONVERT FILE is used to convert a file available in the Tag Image File For-
mat (TIFF) into the JPEG format.
Note The conversion of a picture requires a certain amount of time.
The time taken depends on the size of the picture and the pro-
cessing power of the PC. It is therefore recommended that any
necessary picture format conversions are made before the
connection is set up.
5'0& (+.' 61 )4%
'4#5' (+.'
)'6 (+.' (41/ )4%
%108'46 (+.'
)4#2*+% 12'4#6+105