Chapter 7: Options
51
Chapter 7: Options
The Options page provides several tabs. Of these, the System
and Devices tabs are where most system configuration settings
and options are enabled and customized:
• The System screen provides the primary tools by which
you configure mixing, routing, and processing options.
• The Devices screen provides status, diagnostics, and op-
tions for hardware components.
This chapter shows you how to manage the most important
System and Devices settings, and describes the settings avail-
able in other Options screens.
Overview of Options
The Options page provides the following tabs:
• Plug-Ins (see “Installing and Authorizing Plug-Ins” on
To display the Options page, do one of the following:
Press the Options switch in the View Mode section.
– or –
Click the
Options
tab on-screen.
To display different tabs of the Options page, do one of the
following:
Press the Options switch repeatedly to cycle through avail-
able tabs.
– or –
Click the desired tab at the top of the Options page (System,
Busses, Pickoffs, Snapshots, Misc, Interaction, Devices, Events
or Plug-Ins).
System
(System Configuration)
The System page lets you allocate DSP resources used for rout-
ing and processing, configure Mains and Aux/Group busses,
reset the system (clear console), and quit (shut down VENUE).
To access the System Config page:
Go to the Options page and click the
System
tab.
Basics of Editing System Settings
Settings available in the System screen can only be edited
while in Config mode.
In Config mode, the Edit button becomes available to let you
change settings. When a System Config setting is changed, the
Apply button becomes available at the right of the screen to
let you confirm and apply changes.
In Show mode, the Edit button is unavailable. This protects
these settings from being changed during a performance
(since changes to these settings can interrupt audio).
VENUE SC48 Systems
To change a System Config option:
1
Put the system in Config mode.
2
Go to the Options page and click the
System
tab.
3
Click
Edit
.
4
Change a System Config, Main Bus, Inputs or Bus Configu-
ration option.
5
Click
Apply
to confirm and apply your new settings.
The Plug-Ins tab is not available in D-Show Standalone
software.
Changing the system configuration will restart the D-Show
software and may interrupt audio.
System Configuration tab of the Options page
System Configuration settings available with standard VENUE SC48
Input Channels
FX Returns
Graphic EQs
16, 24, 32, 48
8
0, 8, 16, or 24
Edit
courtesy of
www.sxsevents.co.uk
Phone: 0870 080 2342
email: [email protected]
Event production and Audio-Visual Services
www.sxsevents.co.uk
