VENUE SC48 Guide
170
Next Snapshot Indication in Status Display
The Snapshot Status display shows the currently targeted
(next) snapshot in red text directly above the display of the
last (most recently recalled) snapshot. Pressing the Snapshot
Recall button immediately recalls the targeted snapshot and
makes it the last recalled snapshot.
Snapshot Controls on the SC48
Console
Snapshot controls are provided in the Snapshots section.
These controls provide direct access to a few basic snapshot
commands and allow manual control of snapshot recall.
Snapshots Section
You can target (select), store, and recall snapshots from the
Snapshots controls in this section.
The Snapshot controls in the Snapshots section perform the
following functions:
Store
Stores the current state of all console parameters in the
targeted snapshot. This switch mirrors the Store button in the
Snapshots page.
Recall
Recalls the targeted snapshot. This switch mirrors the
Recall button in the Snapshots page.
Select Encoder
Turning the Select encoder scrolls through and
selects the targeted snapshot in the Snapshots list. The 6-char-
acter display shows the name of the currently targeted snap-
shot. A period is appended to the displayed snapshot name to
indicate whenever it has been edited since being recalled.
Previous
Instantly recalls the snapshot prior to the most re-
cently recalled snapshot. This switch mirrors the Recall Previ-
ous button in the Snapshots page.
Next
Instantly recalls the snapshot immediately following the
most recently recalled snapshot. This switch mirrors the Recall
Next button in the Snapshots page.
F1 for Preview Mode
When the Mute Groups/Function section is in Function
mode, pressing F1 engages Preview mode (see “Preview Mode”
on page 181).
Snapshots List
Snapshot Entries
Each entry in the Snapshots List has a number (001–999) and
name, along with icons for Lock and Enable status. If either
the MIDI Read or Generate feature is enabled, each snapshot
will also have a time code value, trigger indicator, or send in-
dicator. Tempo can also be shown, instead of MIDI.
Recall Buttons
The Recall Previous (–) and Recall Next (+) buttons at the top
of the Snapshots List cause the previous or next snapshot to be
targeted and recalled in one step.
Chase MTC
Enables or suspends automated recall of snapshots when ei-
ther the MTC Read or MTC Generate option is enabled.
Navigating the Snapshots List
Snapshots are highlighted in color in the Snapshots list to in-
dicate the following:
Green
Indicates the last recalled snapshot
Red
Indicates the currently targeted snapshot
Yellow
Indicates that the snapshot is both the last recalled
and currently targeted snapshot
Blue
Indicates that the snapshot is part of a multiple snapshot
selection but not the last recalled or currently targeted snap-
shot. Recalled and Targeted snapshots can also be part of a
multiple selection in the list. In this case, the sequence num-
ber is blue while the rest of the name is red, green or yellow.
Next and Last Recalled snapshot display in the Status area
Snapshots section on the SC48 console
Next snapshot (red)
Most recently recalled
snapshot (green)
Store
Previous
Recall
Next
Select Encoder
The Previous and Next switches combine target and recall
actions in one step, causing the next or previous snapshot to
be instantly active. These switches cannot be used to pre-
view snapshots before recalling them.
For more information on how to use the Event List to cus-
tomize this or other console functions, see Chapter 22,
“Events.”
courtesy of
www.sxsevents.co.uk
Phone: 0870 080 2342
email: [email protected]
Event production and Audio-Visual Services
www.sxsevents.co.uk
