VENUE SC48 Guide
136
EQ Controls in Channel Control
4-Band Parametric EQ (Digital Mode)
The table below shows how built-in EQ parameters (default digital EQ mode) are mapped to Channel Control encoders.
4-Band Parametric EQ (Analog Mode)
This table shows how parameters are mapped to Channel Control encoders when using built-in EQ in analog mode.
To engage or disengage a band:
Press the Gain encoder for that band to toggle it in/out.
When engaged, the indicator LED at the bottom of that en-
coder LED ring lights as shown in the tables.
To bypass the current EQ module:
Press the Channel Control In switch.
To adjust EQ gain and frequency parameters:
Adjust the Gain and Freq encoders for each band as needed.
To reset an EQ parameter to its default value:
Hold the Default switch and press the encoder.
To reset the entire EQ section (all bands) on a channel:
Hold the Default switch and press the In switch.
Toggling Control Between Q/Balance/Width
Freq and Q (BW) share the same encoder in each EQ band. The
built-in EQ and some plug-ins also provide Q (or BW/band-
width) for Analog EQ mode.
To adjust Q (or B/W):
1
Press the <Freq> encoder for the desired band to place that
encoder in Q (or B/W) mode.
2
Rotate the encoder to set the desired Q (or B/W).
Bell and Shelf Filters
The EQ filter type (Shelf or Bell) can be toggled from the con-
sole or on-screen using the mouse.
To toggle between Bell and Shelf filters:
Hold the Shift switch and press the encoder for Freq.
– or –
• Click the on-screen
Bell/Shelf
selector for that channel.
The indicator LED at the bottom of that encoder’s ring indi-
cates filter type and Freq/Q mapping as shown in the tables.
EQ Plug-Ins
Whenever a mappable EQ plug-in is present on a selected in-
put channel, pressing the Plug-Ins switch brings the matching
parameters of that plug-in to the Channel Control encoders.
When mapped to a compatible EQ plug-in, the Channel Con-
trol In switch toggles the plug-in in/out (bypass).
Channel Control parameter mapping for digital EQ (built-in or plug-in)
EQ (digital)
(green)
1
2
3
4
5
6
7
8
Rotate
Lo Gain
Lo Freq
(or Q)
Lo Mid Gain
Lo Mid Freq
(or Q)
Hi Mid Gain
Hi Mid Freq
(or Q)
Hi Gain
Hi Freq
(or Q)
Push
(Indicator
LED)
(Bell mode)
In (green)
Out (off)
Q (red, flash)
Freq (red)
In (green)
Out (off)
Q (red, flash)
Freq (red)
In (green)
Out (off)
Q (red, flash)
Freq (red)
In (green)
Out (off)
Q (red, flash)
Freq (red)
Shift+Push
Shelf mode
Q (green
flash)
Freq (off)
Q (green
flash)
Freq (off)
Channel Control parameter mapping for analog EQ (built-in or plug-in)
EQ (analog)
(green)
1
2
3
4
5
6
7
8
Rotate
Lo Gain
Lo Freq
Lo Mid Gain
Lo Mid Freq
(or BW)
Hi Mid Gain
Hi Mid Freq
(or BW)
Hi Gain
Hi Freq
Push
(Indicator
LED)
In (green)
Out (off)
n/a
In/Out
Bandwidth
(red, flash)
Freq (red)
In/Out
Bandwidth
(red, flash)
Freq (red)
In/Out
n/a
courtesy of
www.sxsevents.co.uk
Phone: 0870 080 2342
email: [email protected]
Event production and Audio-Visual Services
www.sxsevents.co.uk
