VENUE SC48 Guide
128
Adjusting Dynamics
Dynamics controls can be adjusted using the Channel Control section of the ACS, or using on-screen controls.
Adjusting Dynamics in Channel Control
The 8 dual-purpose rotary/switch encoders, function switches, In/Out switch, and two-row LCD in Channel Control provide a
unified, consistent set of controls to adjust built-in and plug-in dynamics processors for the currently selected channels.
To access comp/lim parameters:
1
Select one or more channels to target them in the ACS Channel Control section.
2
Press the
Comp/Lim
or Exp/Gate function switch in Channel Control.
To adjust comp/lim parameters:
Rotate or push an encoder (1-8) corresponding to the displayed parameter. For example, rotate encoder 1 to adjust threshold;
press encoder 7 to engage/disengage Key HF.
To bypass the current dynamics processor:
Press the Channel Control
In
switch to toggle the process in/out.
The table below shows how compressor/limiter parameters are mapped to Channel Control encoders.
The table below shows how expander/gate parameters are mapped to Channel Control encoders.
Dynamics switches in Channel Control
Comp/Lim
User
Input
Plug-in
EQ
Comp/Lim Exp/Gate
Aux Sends 1-8 Aux Sends 9-16
Exp/Gate
Channel Control parameter mapping for Comp/Lim (built-in or plug-in)
Comp/Lim
(blue)
1
2
3
4
5
6
7
8
Rotate
Threshold
Ratio
Attack
Knee
Release
Gain
Key hf
Key lf
Push
(Indicator
LED)
In (green)
Out (off)
In (green)
Out (off)
Channel Control parameter mapping for Exp/Gate (built-in or plug-in)
Exp/Gate
(yellow)
1
2
3
4
5
6
7
8
Rotate
threshold
ratio
attack
hold
release
range
Key HF
Key LF
Push
(Indicator
LED)
In (green)
Out (off)
In (green)
Out (off)
courtesy of
www.sxsevents.co.uk
Phone: 0870 080 2342
email: [email protected]
Event production and Audio-Visual Services
www.sxsevents.co.uk
