manualshive.com logo in svg

Avid Technology VENUE SC48, Manual

The Avid Technology VENUE SC48 is a groundbreaking audio mixing console for live sound production. Unlock its full potential by accessing the user manual, available for free download on our website. Discover the intricacies of this powerful device and enhance your live sound experience today.

Share
Download
background image

VENUE SC48 Guide

140

Presets for Built-In and Graphic EQ 

You can store and load EQ settings to disk as Preset files. Pre-
sets can be used with built-in and plug-in EQ processors, in-
cluding the graphic EQ. Preset files can be moved between sys-
tems and used for other Shows. Presets can be accessed from 
the control surface or on-screen. 

To save or load a preset:

1  

Adjust EQ parameters as needed. 

2  

Click the EQ Presets icon on-screen. (The Presets icon is 

available in the Inputs screen EQ section, and in the graphic 
EQ screen for an output channel).

3  

Choose a Presets folder in the Folder display at the top of the 

Presets window. If necessary, choose the appropriate Presets 
folder by clicking and selecting it from the Folder pop-up 
menu.

4  

Do any of the following:

• To preview an existing preset, click its name in the Presets 

window. 

• To load the currently selected preset, press Enter or click 

the Close box in the Presets window title bar.

• To load a preset and close the Presets window, dou-

ble-click the preset.

• To save the current EQ settings as a new preset, click 

New

and enter a name for the preset file.

• To cancel without changing settings, click 

Cancel

. 

To save or load a preset for the Graphic EQ:

1  

Go to the Outputs page for the channel on which the

graphic EQ is assigned. If necessary, click the 

31-Band Graphic 

Equalizer

 tab to display the graphic EQ on that channel. 

2  

Click the graphic EQ Presets icon (above the EQ bands, next 

to the In-Circuit button). 

3  

Choose a Presets folder in the Folder display at the top of the 

Presets window. If necessary, choose the appropriate Presets 
folder by clicking and selecting it from the Folder pop-up 
menu.

4  

Do any of the following:

• To preview an existing preset, click its name in the Presets 

window. 

• To load the currently selected preset, press Enter or click 

the Close box in the Presets window title bar.

• To load a preset and close the Presets window, dou-

ble-click the preset.

• To save the current graphic EQ settings as a new preset, 

click 

New

 and enter a name for the preset file. 

• To cancel without changing settings, click 

Cancel

.

Check the Factory Presets folder for preconfigured settings.

For information about creating and transferring folders and 
files, see Chapter 20, “Shows and File Management.”

EQ Presets window

Presets icon

Presets window

courtesy of

www.sxsevents.co.uk

Phone: 0870 080 2342

email: [email protected]

Event production and Audio-Visual Services

www.sxsevents.co.uk

Summary of Contents for VENUE SC48

















































































































































































































































































Reviews:

No comments

Related manuals for VENUE SC48

Nakamichi MX-100 Owner'S Manual preview
MX-100
Brand: Nakamichi Pages: 5
Softube Console 1 Quick Start Manual preview
Console 1
Brand: Softube Pages: 1
Native Instruments SOLID BUS COMP Manual preview
SOLID BUS COMP
Brand: Native Instruments Pages: 12
Fender PX-2208 Owner'S Manual preview
PX-2208
Brand: Fender Pages: 90
Hama 00040510 Operating Instructions Manual preview
00040510
Brand: Hama Pages: 22
Nady Audio MM-14FX Owner'S Manual preview
MM-14FX
Brand: Nady Audio Pages: 2
FAME Flanger LEF-312 User Manual preview
Flanger LEF-312
Brand: FAME Pages: 15
Midas HERITAGE 3000 Operator'S Manual preview
HERITAGE 3000
Brand: Midas Pages: 78
Boston Acoustics BA X8 User Manual preview
BA X8
Brand: Boston Acoustics Pages: 18
Andrew James Multi-functional food mixer User Manual preview
Multi-functional food mixer
Brand: Andrew James Pages: 25
Sony FXE-120 Specifications preview
FXE-120
Brand: Sony Pages: 8
Sony DMX-E3000 Brochure & Specs preview
DMX-E3000
Brand: Sony Pages: 8
Sony MX-P21 Operating Instructions Manual preview
MX-P21
Brand: Sony Pages: 28
Sony MXP-310 Manual preview
MXP-310
Brand: Sony Pages: 36
Sony PS4 CUH-1006A A Safety Manual preview
PS4 CUH-1006A A
Brand: Sony Pages: 52
Sony Outdoor Storage Service Manual preview
Outdoor Storage
Brand: Sony Pages: 52
Sony MX-P21 Service Manual preview
MX-P21
Brand: Sony Pages: 54
Sony mxp-29 Operation And Maintenance Manual preview
mxp-29
Brand: Sony Pages: 79

Brands by name

Popular brands

Load more brands