manualshive.com logo in svg

Avid Technology VENUE SC48, Manual

The Avid Technology VENUE SC48 is a groundbreaking audio mixing console for live sound production. Unlock its full potential by accessing the user manual, available for free download on our website. Discover the intricacies of this powerful device and enhance your live sound experience today.

Share
Download
background image

Chapter 4: Basic Commands and Modes

27

Chapter 4: Basic Commands and Modes

Control Overview

Most VENUE features and controls that are used during a per-
formance are available from both the console and on-screen. 
Changes made on one are immediately reflected in the other, 
letting you use almost any combination of console and screen 
controls to mix.

The software screen is not required in order to mix a perfor-
mance, as all essential mixing controls are provided on the 
console. However, the screen is essential when setting up and 
configuring the system before a performance. 

Software-Only Controls and Displays

Many configuration settings and options are only available 
on-screen, including hardware configuration settings, busses, 
plug-in installation, and system diagnostics. For more infor-
mation, see “System” on page 51.

Software Screen Banner Display

The software screen provides a banner display in the lower left 
corner. This display is provided to maintain line-of-sight mix-
ing by showing the currently adjusted parameter (such as
fader level or compression threshold) as you make changes to
the parameter. The banner display also provides Tool Tip text 
and status messages. 

Tool Tips

With the mouse or trackball, place the cursor over a screen
item to see a brief explanation in the banner display. 

Status Messages

The banner display alerts you to certain operating conditions 
such as Multi-Select and Multi-Assign modes.

Console and Software Screen Linking

The software screen is linked to console actions by default. For 
example, selecting an input channel on the console changes 
the screen to the Inputs page, and selecting an output bus 
changes the screen to the Outputs page. You can customize 
how VENUE targets channels to best match your working
style. For more information, see “Interaction” on page 58. 

Status bar showing Tool Tip

Banner display showing current state of the system

Tool Tip

Cursor

Banner display

Mode display

courtesy of

www.sxsevents.co.uk

Phone: 0870 080 2342

email: [email protected]

Event production and Audio-Visual Services

www.sxsevents.co.uk

Summary of Contents for VENUE SC48

















































































































































































































































































Reviews:

No comments

Related manuals for VENUE SC48

Fender M12 Operating Instructions Manual preview
M12
Brand: Fender Pages: 36
UniFi Cloud key Gen2 Plus Quick Start Manual preview
Cloud key Gen2 Plus
Brand: UniFi Pages: 46
M-Audio ProjectMix I/O Benutzerhandbuch preview
ProjectMix I/O
Brand: M-Audio Pages: 45
Zeck Audio MD6 Service Manual preview
MD6
Brand: Zeck Audio Pages: 15
Behringer Xenyx QX602MP3 Quick Start Manual preview
Xenyx QX602MP3
Brand: Behringer Pages: 19
Fender MX 5216 Owner'S Manual preview
MX 5216
Brand: Fender Pages: 60
Giani CUCINAGCGM-MO11B Instruction Manual preview
CUCINAGCGM-MO11B
Brand: Giani Pages: 11
Sinbo SMX 2720 User Manual preview
SMX 2720
Brand: Sinbo Pages: 34
High End Hog iPC Manual preview
Hog iPC
Brand: High End Pages: 5
TeachLogic Matrix IRP-1650/LS4 Installer And Operation Manual preview
Matrix IRP-1650/LS4
Brand: TeachLogic Pages: 26
Bosch MSM6BRE Operating Instructions Manual preview
MSM6BRE
Brand: Bosch Pages: 70
Honeywell HON 985A Manual preview
HON 985A
Brand: Honeywell Pages: 16
4ms Company Dual Looping Delay User Manual preview
Dual Looping Delay
Brand: 4ms Company Pages: 20
Philips BTM2310 Service Manual preview
BTM2310
Brand: Philips Pages: 25
Russell Hobbs RHHMRET Instructions And Warranty preview
RHHMRET
Brand: Russell Hobbs Pages: 8
Russell Hobbs 21200-56 Instructions Manual preview
21200-56
Brand: Russell Hobbs Pages: 60
Bluestone HMB-6333S User Manual preview
HMB-6333S
Brand: Bluestone Pages: 11
Denon Split Mix 6 User Manual preview
Split Mix 6
Brand: Denon Pages: 28

Brands by name

Popular brands

Load more brands