VENUE SC48 Guide
22
Selected Channel Sections (ACS)
The Selected Chan (selected channel, or Assignable Channel
Sections) include the Inputs, Bus Assigns, and Channel Con-
trol sections, along with stereo channel meters, an LCD dis-
play, and dynamics meters.
Input
This section provides switches for channel phantom power,
input pad, polarity (phase), and Safe status.
Meters
Below the Inputs switches are two 10-segment Selected Chan-
nel meters, LEDS for Stereo and Solo state and a 6-character
LCD display.
The dual, 10-segment, bi-color LED meters indicate input level
and clip status for the currently targeted or Soloed channel.
The 6-character Selected Channel display shows the name of
the currently selected channel. The Selected Channel display
temporarily reverts to a parameter display mode any time an
encoder is adjusted on the selected channel.
The Stereo LED lights solid when a stereo input or output is
targeted. The Solo LED flashes any time a channel is in PFL,
AFL or Solo in Place mode.
Dynamics
Gain Reduction Meters
The meters in the Dynamics section provide dedicated meter-
ing for built-in and plug-in dynamics processors.
Bus Assigns
The Bus Assigns switches are the primary routing controls for
the currently selected channel, letting you bus it directly to
the Mains (L–R) bus or to any other mono or stereo group.
Channel Control
Gain, EQ, Dynamics, Plug-ins, Auxes
Channel Control is the “center section” panel for consistent
display and control of EQ, dynamics, and plug-in processing
and Auxes.
For optimal mixing flexibility, you can assign up to 8 param-
eters as a custom User layout.
Selected Channel control and display sections
In addition, the Flex Channel provides a dedicated fader,
channel encoder, Select, Solo and Mute switches for the cur-
rently selected channel, with the ability to be unlinked from
input channel banking and selection (“latch” your most im-
portant input to the Flex Channel). For more information,
see “Flex Channel” on page 23.
Selected Channel Input controls, meters and displays
For Selected Channel metering scale, see “Selected Channel
Level Meters” on page 108.
Dynamics
Gain Reduction
Meters
Channel Control
Inputs
Bus Assigns
+48V
20 dB Pad
Input Polarity
Stereo
Solo
Safe
Meters
LCD Display
Bus assign switches
Channel Control encoders, LCD and mode switches
L–R
C/Mono
Group 1–8
Stereo Pan
Encoders
LCD
User
Input
Plug-In EQ
Comp/
Exp/
Aux Sends
Lim
Gate
1-8
9-16
courtesy of
www.sxsevents.co.uk
Phone: 0870 080 2342
email: [email protected]
Event production and Audio-Visual Services
www.sxsevents.co.uk
