VENUE SC48 Guide
48
User Assignment
User mode
lets you mix and match parameters from different
function types and save it as the single Channel Control User
assignment.
The User assignment is stored with each Show file. A default
(factory) User assignment is provided to get you started
quickly.
To load the Default User assignment:
1
Select one or more channels.
2
Press the User switch (Channel Control Function switch).
3
Press the flashing In switch in the Channel Control section.
The factory Default User assignment is preconfigured to bring
the following parameters to the Channel Control section.
Creating a Custom User Assignment
To assign Channel Control encoders to parameters:
1
Double-press the Channel Control User switch to enter User
Assign mode.
2
Press a Channel Control encoder (1-8) to select it for assign-
ment.
3
On-screen, click to select the parameter you want mapped to
the selected Channel Control encoder. Continue clicking
other parameters. Each click assigns that parameter to the
next sequential Channel Control encoder, up to 8.
4
Press the flashing User switch to exit Assign mode and store
your assignments.
To make Channel Control assignments on-screen:
1
Right-click any available encoder.
2
Select a Channel Control encoder (
1-8
) from the Channel
Control sub-menu.
3
On-screen, click
Done
to confirm Assignment mode (or press
the flashing User switch), or click
Cancel
.
To clear the User assignment:
1
Double-press the Channel Control User switch to enter User
Assign mode.
2
Hold the Default (Alt) switch and press the flashing Channel
Control In switch.
All assignments are cleared, and the first encoder flashes in As-
sign mode (ready to be re-assigned).
To clear a User assignment:
1
On-screen, right-click a parameter.
2
Choose
Clear <param name>
from the Channel Control
sub-menu.
To clear all User assignments:
1
On-screen, right-click a parameter.
2
Choose
Clear All Assignments
.
3
Click Clear to confirm and clear all; click Cancel to cancel
and leave the User assignment unchanged.
When no User assignments exist, the Channel Control In
switch flashes. This will be the case after a Clear Console, after
clearing all Channel Control assignments, after the first time
the console is powered on, or after loading a Show file from a
different system that does not support Channel Control.
Default User map
Encoder
Parameter
Function (type)
1
Input Gain (rotate)
Gain Guess (push)
Input
2
HPF Freq (rotate)
In/Out (push)
3
Low Mid Gain (rotate)
Q (push)
EQ
4
Low Mid Freq (rotate)
In/Out (push)
5
Hi MId Gain (rotate)
In/Out (push)
6
Hi Mid Freq (rotate)
Q (push)
7
Comp/Lim Threshold
Dynamics
8
Exp/Gate Threshold
courtesy of
www.sxsevents.co.uk
Phone: 0870 080 2342
email: [email protected]
Event production and Audio-Visual Services
www.sxsevents.co.uk
