VENUE SC48 Guide
66
3
In the Channel Control section, press the Aux Sends 1–8 or
Aux Sends 9–16 switch to bank the Channel Control encoders
to those Auxes.
4
Press the Channel Control encoder that corresponds to the
desired Aux Send bus so that its “On” indicator LED lights.
• The first press of an Aux Send switch assigns level control
of the odd-numbered send. The switch lights green to in-
dicate an odd-numbered selection.
• The second press of an Aux Send switch assigns level con-
trol of the even-numbered send. The switch lights yellow
to indicate an even-numbered selection.
5
Turn the encoder to set the Aux Send level.
Configuring Aux Busses (Aux Sends)
VENUE SC48 can be configured to have 8 or 16 Aux busses as
part of the overall Aux/Group bus configuration. Mono Aux
buses can be linked in odd/even pairs to function in stereo (see
“Configuring Aux Busses” on page 87).
Routing Channels to Matrix Busses
Matrix source assignments determine input signal routing to
each of the Matrix mixers. Matrix source inputs can include
up to 12 inputs per mixer.
Matrix signal routing is performed from the Matrix tabs of the
Outputs page (see Chapter 12, “Matrix Mixers”).
Assigning Channels to VCAs
Channels can be assigned to VCAs for consolidated control of
multiple channels.
To assign one or more channels to a VCA:
1
Press the VCA switch to bank the Output Faders to VCAs.
2
Select the VCA (1-8) you wish to assign to by pressing its Se-
lect switch.
3
Press the Multi Assign switch near the Output encoders.
While engaged, the Multi Assign and output Select switch
LEDs flash.
4
Press the Select switch on the inputs or outputs you want as-
signed to the currently targeted VCA. Use the Input and Out-
put Fader bank switches to access the desired channel strips.
5
Press the Multi Assign switch again to confirm the action.
– or –
Select another VCA to confirm the current assignment but re-
main in Multi Assign mode for the newly targeted VCA.
For more information on VCAs, see “Assigning and Using
VCAs” on page 79.
Routing Inputs to Direct Outputs
All Input Channels and FX Returns have Direct Outputs,
which can be assigned to hardware outputs, used as inputs to
plug-ins, and sent to Pro Tools.
Direct Outs are assigned in the Patchbay, and can be con-
trolled from Channel Control section or on-screen. For more
information on routing and assigning Direct Outputs, see “Di-
rect Outputs” on page 78.
Channel Control
Some VENUE systems also offer Variable Groups. To learn
more about these special busses, see the VENUE Profile
Guide or the VENUE D-Show Guide.
1
2
3
4
5
6
7
8
Encoders
Aux Sends 1–8
Aux Sends 9–16
courtesy of
www.sxsevents.co.uk
Phone: 0870 080 2342
email: [email protected]
Event production and Audio-Visual Services
www.sxsevents.co.uk
