VENUE SC48 Guide
116
Adjusting Monitor Level and Delay
To adjust the Solo/Monitor level:
1
Go to the
Options > Busses
tab.
2
In the
Solo and Monitor Operations
section, adjust the
Moni-
toring
encoder.
You can apply an adjustable delay to the monitor outputs and
headphone outputs to match the acoustic delay from the
main speaker system.
To adjust monitor output delay:
1
Go to the
Options > Busses
tab.
2
Adjust the
Delay
setting in the
Solo and Monitor Operations
section. Be sure to click the
In
button beneath the on-screen
encoder to enable Delay. When lit, the Delay setting is applied
to the monitor output.
Talkback, 2-Track and Oscillator
Controls
You can assign Talkback microphone input, 2-Track source in-
puts, and the built-in Oscillator to any Input Channel or FX
Return. Talkback, 2-Track, and built-in Oscillator output can
be routed to any output busses.
Using Talkback
The Talkback input on the back panel of the SC48 console ac-
cepts signal from any dynamic or condenser microphone.
Assigning Talkback Microphone Input
To assign input to an Input Channel or FX Return:
1
Go to the
Patchbay > Inputs
tab, then click the
Channels
tab
or the
FX Returns
tab.
2
At the top of the channel grid, click the
FOH
tab.
3
Click in the channel grid to assign the “
Talk
” input source to
an Input Channel or FX Return (listed on the left).
Routing Directly to an Output
To route the Oscillator, 2-Track, or Talkback directly to an output:
1
Go to the
Options > Misc
page and click the
Route
button in
the Talkback sections.
2
Go to the Outputs page and click to select the desired output
(it flashes briefly).
3
In the confirmation dialog that appears, click
Route
to con-
firm your assignment or click
Cancel
to cancel without chang-
ing the current routing.
Activating Talkback Input and Setting Level
To activate and set the level for Talkback input:
1
Go to the
Options > Misc
page.
2
Click the on-screen
In
button in the
Talkback
section.
3
On the back panel, turn the Talkback Mic Gain knob.
4
Set the Talkback input level by adjusting the on-screen
Level
knob in the Talkback section.
Setting Talkback Dim Level
When Talkback is sent directly to an Output bus, the bus pro-
gram material (minus the talkback signal) is automatically re-
duced by the amount specified in the Dim Level setting.
To set the Talkback Dim Level:
1
Go to the Options page and click the
Misc
tab.
2
In the Talkback section, double-click the
Dim Level
text box
and enter a Dim Level value in the range –60 dB (maximum
gain reduction) to 0 dB (no gain reduction).
Assigning Talkback input to an Input Channel in the Patchbay
Talkback controls in the Options > Misc page
Signals are routed to output busses post-mute and post
fader.
You can designate a footswitch, Function switch or other
triggers to control Talkback. For more information, see
Chapter 22, “Events.”
courtesy of
www.sxsevents.co.uk
Phone: 0870 080 2342
email: [email protected]
Event production and Audio-Visual Services
www.sxsevents.co.uk
