VENUE SC48 Guide
90
Adjusting Aux Send Controls
You can adjust Aux Sends from the input encoders, from
Channel Control, and on-screen.
Using the Input Encoders
To control Aux Sends using the input encoders:
Press an Encoder assign Send switch (1–2/15–16) to bank
that Aux Send to the input encoders.
To turn a send on or off:
1
Press the input encoder for the Aux on the desired channel
to toggle that send on/off.
When Aux busses are linked, input signals are panned across
the bus pair. Panning can be controlled from the Input encod-
ers or from the ACS Aux Sends section.
To control panning of Aux bus pairs from the Input section:
1
Press an Encoder assign Send switch (1–2/15–16) to bank
that Aux Send to the input encoders.
• The first press of the Aux switch assigns control of the
send level to the encoder. The switch lights green and the
encoder display shows the odd-numbered send.
• The second press of the Aux switch assigns control of the
send pan to the encoder. The switch lights yellow and the
display shows a “P” before the odd-numbered send.
2
With the Aux switch lit, turn the rotary encoder on each In-
put Channel or FX Return to adjust the send pan.
Using Channel Control
Channel Control lets you adjust Aux sends and send levels in
two banks, Aux 1-9 and Aux 9-16.
To access Auxes in Channel Control:
1
Select one or more channels.
2
Press the Aux Sends 1-8 or Aux Sends 9-16 switch in Chan-
nel Control.
The Aux Sends 1-8 switch LED lights purple; the Aux Sends
9-16 switch LED lights teal (light blue). The LCD display iden-
tifies each send in the current bank (
1-8
or
9-16
).
To turn a send on or off:
1
Choose the desired bank of Auxes (1-8 or 9-16) by pressing
the corresponding Aux Send switch. When engaged:
• The Aux Sends 1-8 switch lights purple.
• The Aux Sends 9-16 switch lights turquoise (blue/green).
2
Press the encoder (1-8) for the desired Aux to toggle that
send on/off. While engaged, the indicator LED at the bottom
of that encoder LED ring lights.
To adjust mono Aux send level:
Adjust the encoder for each Aux as needed.
To adjust stereo linked Aux send level:
Adjust the odd-numbered encoder for the desired pair of
Auxes. For example, if Auxes 7 and 8 are stereo linked, adjust
encoder 7 (labelled <
Aux 7>
in the LCD) to adjust send level.
To pan a stereo linked Aux:
Adjust the even-numbered encoder for that pair (labelled
with the letter P in front of the name of the Aux in the LCD).
For example, if Auxes 7 and 8 are stereo linked, Aux 8 encoder
will be labelled as P<Aux 7>; adjust encoder 8 (
P<Aux 7>
) to
pan the send.
Aux sends in Channel Control (Auxes 1-8 shown)
Channel Control
User
Input
Plug-in
EQ
Comp/Lim Exp/Gate
Aux Sends 1-8 Aux Sends 9-16
In
Aux 3 Aux 4
Aux Sends 1-8 switch
Aux 1
Aux 2
Aux 5
Aux 6
Aux 7 Aux 8
courtesy of
www.sxsevents.co.uk
Phone: 0870 080 2342
email: [email protected]
Event production and Audio-Visual Services
www.sxsevents.co.uk
