VENUE SC48 Guide
98
Adjusting Matrix Mixer Output
Controls
Matrix Mixer Output Levels
Matrix output levels are controlled by the Output faders.
To control mixer output levels:
1
Press the Matrixes switch to bank Matrix mixers to the Out-
put faders.
2
Adjust the fader corresponding to the output level you want
to change.
Matrix Mixer Output Delay
A variable delay (0–500 ms) can be applied to the output of
Matrix mixers. For instructions, see “Output Delay” on
page 77.
Delay Compensation with Matrix Mixers
VENUE automatically compensates for the delay offsets that
can arise when combining different signal paths within a Ma-
trix mixer.
Additional Information about Delay Compensation
• The overall latency through a Matrix is determined by
the path with the highest latency.
• All inputs within a Matrix mix are guaranteed to be phase
accurate, but mixes are not necessarily aligned to each
other. This ensures that all mixes are not penalized in the
case of one or more exceptionally high-latency signal
paths.
• Delay compensation only accounts for a channel’s
post-insert pickoff. Channels that feed User Inputs and
Auxes (pre-insert) will not be fully compensated for.
Snapshot Data and Parameters for
Matrix Mixers
Snapshots can store and recall all source assignments (of each
matrix mixer) when the Matrix (“Mtx”) data type is scoped. In
addition, all User Input assignments are stored, letting you re-
configure Matrix mixers and User Input assignments on a per
snapshot basis, if desired.
The following table describes what can be stored and recalled
in each snapshot when the MTX data type is scoped.
The Recall Safe tab of the Snapshots page provides two data
“Mix” data types that let you discretely “safe” source and/or
user input assignments to prevent them from being changed
with a snapshot recall.
For complete information on VENUE snapshots, see
Chapter 21, “Snapshots.”
Table 13. Snapshot data types and parameters for Matrix mixers
Snapshot
Data Type
Included Parameters (for Each Scoped Channel Strip)
MTX
Mixer Input Sources, User Input Assignments (global
to all Matrixes), and pickoffs; Mixer Input level, Mixer
Input on/off state and Mixer
Input
Link state
You cannot snapshot link state of Matrix outputs.
courtesy of
www.sxsevents.co.uk
Phone: 0870 080 2342
email: [email protected]
Event production and Audio-Visual Services
www.sxsevents.co.uk
