manualshive.com logo in svg

Avid Technology VENUE SC48, Manual

The Avid Technology VENUE SC48 is a groundbreaking audio mixing console for live sound production. Unlock its full potential by accessing the user manual, available for free download on our website. Discover the intricacies of this powerful device and enhance your live sound experience today.

Share
Download
background image

Chapter 3: VENUE SC48 Control Overview

23

Flex Channel

The Flex Channel is a special fader strip that provides a dedi-
cated fader, encoder, and LCD display along with channel Se-
lect, Solo and Mute switches for the currently selected chan-
nel. The Flex Channel can also be latched to any channel for 
uninterrupted control of any vital channel. 

In its default Selected Channel mode the Flex Channel mirrors 
the currently selected channel. The Flex Channel encoder fol-
lows the current Encoder Assignment mode (gain, pan, HPF, 
or a send). The Flex Channel LCD shows the current channel 
name. 

In the optional Flex Channel mode, the Flex Channel is
latched to the currently selected channel. Selecting a different 
channel or changing fader banks will not change the assign-
ment of the Flex Channel, letting you keep constant control 
over your most important signal. The Flex Channel LCD is red 
when latched and green when not latched. 

To latch a channel to the Flex Channel from the console:

1  

Select the input or output channel you want assigned to the 

Flex Channel.

2  

Press the 

Select/Latch 

switch on the Flex Channel. A dialog

appears on-screen asking you to confirm the assignment. 

3  

Press the Flex Channel Select/Latch switch again (or click 

Latch

 on-screen) to confirm the assignment. Click 

Cancel

 to

cancel the assignment. 

To latch the Flex Channel on-screen:

„

Right-click on the desired channel in the lower fader display 

and choose 

Latch <channel>.

To return to Selected Channel mode, do one of the following: 

„

Double-press the Flex Channel Select/Latch switch. The 

(former) channel assigned to the Flex Channel becomes the 
selected channel in the ACS, and the Flex Channel reverts to 
Selected Channel mode. 

– or –

Right-click the currently latched channel on-screen in the 
lower fader display and choose 

Unlatch <channel>

.

Flex Channel 

Encoder

Select/Latch

Mute

Fader

Solo

Double-press the Select/Latch switch to latch that channel 
and clear the confirmation dialog in one action. 

courtesy of

www.sxsevents.co.uk

Phone: 0870 080 2342

email: [email protected]

Event production and Audio-Visual Services

www.sxsevents.co.uk

Summary of Contents for VENUE SC48

















































































































































































































































































Reviews:

No comments

Related manuals for VENUE SC48

Calrec Apollo Installation & Technical Manual preview
Apollo
Brand: Calrec Pages: 124
Tascam M-16 Operation & Maintenance Manual preview
M-16
Brand: Tascam Pages: 51
Origin Effects REVIVALDRIVE HOT ROD EDITION Owner'S Manual preview
REVIVALDRIVE HOT ROD EDITION
Brand: Origin Effects Pages: 20
Pyle PPDLC1 Instructions preview
PPDLC1
Brand: Pyle Pages: 1
Cole Parmer 55008-02 Operating Manual preview
55008-02
Brand: Cole Parmer Pages: 64
Maestro FUZZ MFZ-271A Technical & Service Manual preview
FUZZ MFZ-271A
Brand: Maestro Pages: 8
Andrew James Multi-functional food mixer User Manual preview
Multi-functional food mixer
Brand: Andrew James Pages: 25
Russell Hobbs MX3100BKR Instructions Manual preview
MX3100BKR
Brand: Russell Hobbs Pages: 16
Mellerware PRIMA 150W Manual preview
PRIMA 150W
Brand: Mellerware Pages: 16
KHDK Scuzz Box User Manual preview
Scuzz Box
Brand: KHDK Pages: 2
Bistro BHSM0020 Use And Care Manual preview
BHSM0020
Brand: Bistro Pages: 16
Chicago Electric 95111 Assembly And Operating Instructions Manual preview
95111
Brand: Chicago Electric Pages: 10
Yamato MG600H Instruction Manual preview
MG600H
Brand: Yamato Pages: 2
Altman LSC GENESIS Quick Start Manual preview
LSC GENESIS
Brand: Altman Pages: 24
Lithium Grim Supreme Leader Building Instructions preview
Supreme Leader
Brand: Lithium Grim Pages: 10
Lithium Grim OmniRat Building Instructions preview
OmniRat
Brand: Lithium Grim Pages: 9
Lithium Grim Magnum Building Instructions preview
Magnum
Brand: Lithium Grim Pages: 8
Gemini MX-02 Operation Manual preview
MX-02
Brand: Gemini Pages: 12

Brands by name

Popular brands

Load more brands