VENUE SC48 Guide
130
3
Press the Plug-In switch in the Channel Control section.
Plug-in parameters that match Channel Control parameters
are mapped to the encoders, and shown in the LCD in ALL
CAPS (upper case).
4
Adjust plug-in parameters by pressing or turning the corre-
sponding Channel Control encoders.
Channel Modes Affecting Dynamics
Both the Channel Config settings for Input Direct mode and
Dyn Pre EQ affect operation of built-in Dynamics.
On VENUE SC48 systems, both of these settings are available
on-screen.
Dyn Pre EQ
By default, built-in Dynamics processing occurs before
built-in EQ processing in the signal chain of Input Channels.
This can be changed on a per-channel basis by toggling the
channel’s Dyn Pre EQ setting.
To toggle the Dyn Pre EQ setting of an Input Channel:
1
Target the Input Channel whose Dyn Pre EQ mode you want
to change by pressing its Select switch, and make sure the In-
puts page is displayed.
2
Click the
Dyn Pre EQ
button in the (channel) Config section
in the upper right corner of the screen. When enabled, the
Dyn Pre EQ LED lights.
Input Direct Mode
Input Direct mode lets you completely bypass the built-in dy-
namics and EQ processing, and all inserts on Input Channels
and FX Returns.
To toggle Input Direct model:
1
Target the Input Channel by pressing its Select switch, and
make sure the Inputs page is displayed.
2
Click the
Input Direct
button in the (channel) Config section
in the upper right corner of the screen. When enabled, the In-
put Direct LED lights.
For more information, see “Adjusting Input Controls” on
page 68.
Dynamics Settings and Presets
Built-in Dynamics settings can be copied and pasted between
Input Channels. Settings can also be stored and loaded as dy-
namics Presets to archive and transfer settings.
Copying and Pasting Dynamics Settings
To copy and paste dynamics settings:
1
Right-click anywhere in the Comp/Lim or Exp/Gate areas of
the on-screen Dynamics section and choose
Copy Comp/Lim
Settings
, or
Copy Exp/Gate Settings
.
2
Go to the channel where you want to paste the settings.
3
Right-click in the Comp/Lim or Exp/Gate areas of the
on-screen Dynamics section and choose
Paste Comp/Lim Set-
tings
or
Paste Exp/Gate Settings
.
To copy and paste all of a channel’s built-in Dynamics settings:
1
Right-click in the on-screen Dynamics Graph and choose
Copy Dynamics Settings
.
2
Select the Input Channel where you want to paste the set-
tings.
3
Right-click in the on-screen Dynamics Graph of the new
channel and choose
Paste Dynamics Settings
.
Plug-in switch in Channel Control
Channel Config controls in the Inputs page
Channel Control
In
ATTACK KNEE
Plug-in switch
C/L
THRESH RATIO
REL
GAIN KEY HF KEY LF
User
Input
Plug-in
EQ
Comp/Lim Exp/Gate
Aux Sends 1-8 Aux Sends 9-16
Copying dynamics settings
courtesy of
www.sxsevents.co.uk
Phone: 0870 080 2342
email: [email protected]
Event production and Audio-Visual Services
www.sxsevents.co.uk
