manualshive.com logo in svg

Avid Technology VENUE SC48, Manual

The Avid Technology VENUE SC48 is a groundbreaking audio mixing console for live sound production. Unlock its full potential by accessing the user manual, available for free download on our website. Discover the intricacies of this powerful device and enhance your live sound experience today.

Share
Download
background image

Chapter 28: Troubleshooting

225

Chapter 28: Troubleshooting

This chapter provides troubleshooting and problem solving information. It includes a table of problems and solutions that pro-
vides answers to common questions, explains on-screen text messages, and refers you to specific sections later in this chapter or
elsewhere in this guide for details and instructions.

Problem Solving

The following table provides descriptions of situations that may arise while operating a VENUE system and includes common 
questions, symptoms and error messages, along with possible solutions.

Table 29. Troubleshooting Errors and Messages

Symptom or Message

Possible Cause

Solution

Faders, Switches, Channels, and Devices

Fader stuck

Fader path was blocked during startup cali-
bration

Reset the unit on which the stuck fader resides by right-click-
ing the unit in the Options > Devices page and choosing
Reset. If possible, wait for a silent portion of a performance 
to avoid unexpected gain changes upon reset. For details, 
see “Hardware Monitoring Window” on page 230).

Only faders and mutes are 
working

Backup personality is in effect

Wait for the system to recover and follow instructions 
on-screen to resume operations (see “Resuming Normal 
Operation” on page 228).

Channel meter Stereo LED 
is flashing

Indicates a difference of 12 dB or more 
between the two sides of the stereo signal.

Trim source levels or input gains to balance. 

Cannot pan an Aux Send 
from the ACS

Aux panning is configured to follow channel 
pan

In the Options > Busses page, select the Follows Channel 
Pan option. Deselect for each Aux Send you want to pan inde-
pendently from channel pan.

Startup and Restarts

System failure and restart,
then the Resume Opera-
tions dialog appears

The VENUE D-Show software has been 
forced to restart and the backup personality 
is now in effect. 

Continue mixing using features available while the backup 
personality is in effect (see “In Case of System Failure” on 
page 227). Follow the instructions on-screen to resume oper-
ations after a restart (see “Resuming Normal Operation” on 
page 228). 

courtesy of

www.sxsevents.co.uk

Phone: 0870 080 2342

email: [email protected]

Event production and Audio-Visual Services

www.sxsevents.co.uk

Summary of Contents for VENUE SC48

















































































































































































































































































Reviews:

No comments

Related manuals for VENUE SC48

Varimixer V20 Operation Manual preview
V20
Brand: Varimixer Pages: 32
D&R Lyra Maintenance Manual preview
Lyra
Brand: D&R Pages: 17
Mad Professor Kosmos Owner'S Manual preview
Kosmos
Brand: Mad Professor Pages: 2
Radial Engineering MIX 2:1 User Manual preview
MIX 2:1
Brand: Radial Engineering Pages: 12
Behringer EURORACK UB1202FX Technical Specifications preview
EURORACK UB1202FX
Brand: Behringer Pages: 3
Mackie Onyx 1620i Bedienungshandbuch preview
Onyx 1620i
Brand: Mackie Pages: 40
Westinghouse MP60W3A-DS Use & Care Manual preview
MP60W3A-DS
Brand: Westinghouse Pages: 3
I TUTTOFARE ROBOT 3 IN 1 Instruction Manual preview
ROBOT 3 IN 1
Brand: I TUTTOFARE Pages: 12
Hamilton Beach Commercial 840210400 Operation Manual preview
840210400
Brand: Hamilton Beach Commercial Pages: 40
Nesco HM-350 Instruction Manual preview
HM-350
Brand: Nesco Pages: 16
Martello My Milky Pro Instruction Manual preview
My Milky Pro
Brand: Martello Pages: 22
Vonyx 172.974 Instruction Manual preview
172.974
Brand: Vonyx Pages: 16
Roland M-240 Owner'S Manual preview
M-240
Brand: Roland Pages: 16
Ozito OZMM1010A Operation Manual preview
OZMM1010A
Brand: Ozito Pages: 8
Ozito DMM-080U Original Instructions Manual preview
DMM-080U
Brand: Ozito Pages: 8
Alesis iMultiMix 16 USB Reference Manual preview
iMultiMix 16 USB
Brand: Alesis Pages: 44
Alexander History Lesson VOL.3 User Manual preview
History Lesson VOL.3
Brand: Alexander Pages: 12
Honeywell HON 985A Manual preview
HON 985A
Brand: Honeywell Pages: 16

Brands by name

Popular brands

Load more brands