manualshive.com logo in svg

Avid Technology VENUE SC48, Manual

Share
Download
Avid Technology VENUE SC48 Manual Download Page 199

Chapter 21: Snapshots

187

Plug-Ins List

To view plug-in data for snapshots in the MIDI/Plug-Ins list:

1  

Target the snapshot you want to modify, or select multiple

snapshots in the list. 

2  

Double-click 

Plug-Ins

 in the 

MIDI/Plug-Ins

 list header to ex-

pand the Plug-In list.

It is also possible to select multiple plug-ins in the Snapshots 
Plug-Ins list and remove or update these plug-ins across mul-
tiple snapshots using Right-click commands. Selections can be 
contiguous or non-contiguous plug-ins in the list. This lets 
you more easily manage all plug-ins inserted on a single chan-
nel, for example.

Adding Plug-Ins to Snapshots

To add a plug-in to one or more snapshots from the Snapshots 
page:

1  

Select an individual snapshot, or create a multi-selection of 

snapshots in the Snapshots list.

2  

Display the Plug-Ins List (see “Plug-Ins List” on page 187). 

3  

Click the 

ADD

 button within the Snapshot Plug-Ins list and 

select a plug-in (or

All Plug-Ins

) from the menu. 

To add a plug-in to multiple snapshots from the Plug-Ins page:

1  

Create a multi-selection of snapshots on the Snapshots page

2  

Go to the 

Plug-Ins

 page. 

3  

Click the 

Snapshots

 menu for the plug-in to be added and 

choose 

Add This Plug-In To Selected Snapshots

. The selected 

plug-in is added to the currently targeted snapshot, as well as 
all other snapshots within the multi-selection.

Snapshots within the multi-selection that already contained 
the plug-in being added are unaffected and preserve any pre-
viously stored settings. 

Removing a Plug-In from Snapshots

To remove a plug-in from snapshots from the Snapshots page:

1  

Select an individual snapshot, or create a multi-selection of

snapshots in the Snapshots List.

2  

Click the Snapshots 

Plug-Ins

icon to show the Snapshots

Plug-Ins list. 

3  

Right-click a plug-in within the plug-in list of the currently 

targeted snapshot and choose 

Remove This Plug-In From Se-

lected Snapshots

.

To remove a plug-in from multiple snapshots from the Plug-Ins
page:

1  

Create a multi-selection of snapshots on the Snapshots page

2  

Go to the 

Plug-Ins

page. 

3  

Click the Snapshot menu for the plug-in to be removed and

choose 

Remove This Plug-In From Selected Snapshots

. 

The selected plug-in is removed from the currently targeted 
snapshot, as well as all other snapshots within the multi-selec-
tion. Only snapshots within the multi-selection that contain 
the selected plug-in are affected. 

Expanded Plug-In list

Managing multiple plug-ins across multiple snapshots

Using the Snapshots pop-up menu in the plug-in rack (Plug-Ins page)

courtesy of

www.sxsevents.co.uk

Phone: 0870 080 2342

email: [email protected]

Event production and Audio-Visual Services

www.sxsevents.co.uk

Summary of Contents for VENUE SC48

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands