Chapter 7: Options
53
Devices
The Devices page lets you view system connections, trouble-
shoot hardware and reset VENUE system components.
To display the Devices tab:
Click
Options > Devices
.
You can use this page to view component status after diagnos-
tics or troubleshooting.
To reset VENUE system hardware components:
1
Put the system in Config mode.
2
Go to the Options page and click the
Devices
tab.
3
Right-click any of the following hardware components:
• Console sections
• Stage or FOH Audio section
4
Choose
Reset
.
Simulating a VENUE Configuration with the
Standalone Software
With the VENUE D-Show Standalone software, you can use
the Devices page to simulate a VENUE system of any size for
purposes of preparing shows and training. See “Simulating a
VENUE Configuration” on page 212.
Other Options and Settings
Busses
The Busses page lets you customize characteristics for the Aux,
Solo, Matrix, and Main busses.
Auxiliaries
These options let you designate bus link status, pick off source,
and stereo pan behavior for Auxiliaries (Aux Send busses).
(Variable Group busses are available on VENUE Profile and
D-Show systems only).
Links
When enabled, this option links the corresponding bus-
ses into bus pairs. Control changes affect both mono Aux bus-
ses, and the Follows Channel Pan option becomes available.
Pickoff
These options let you designate the pre-fader pickoff
point feeding each bus. Choices include pre-EQ, pre-mute,
and pre-fader (post-mute).
Follows Channel Pan
Each channel can be panned indepen-
dently within each linked bus pair, or configured to follow the
channel pan by enabling the Follows Channel Pan option.
Devices tab of the Options page
Busses tab of the Options page
For more information, see Chapter 11, “Aux Sends.”
courtesy of
www.sxsevents.co.uk
Phone: 0870 080 2342
email: [email protected]
Event production and Audio-Visual Services
www.sxsevents.co.uk
