auto maskin DCU 410E, Configuration Manual

Page: 2 / 99

Table of content
1 Preface 5
1.1 About this Manual 5
1.2 Responsibilities 5
1.3 Revisions 5
1.4 Trademarks 5
2 Configuration 6
2.1 Configuration & Firmware Files 6
2.1.1 DCU Web Server Configuration
Interface 6
2.1.2 DCU User Interface Menu 6
2.1.3 USB Memory Interface 6
2.1.3.1 Configuration Files 7
2.1.3.2 Firmware Files 8
2.1.3.3 Copy Configuration File or
Event Log 8
2.2 Connecting to the DCU 8
2.2.1 To Connect to the DCU 8
2.2.2 Further Connection Settings 9
2.2.2.1 Change the IP address of
the DCU 9
2.2.2.2 IP Address Convention
9
2.2.2.3 Connect the DCU to a
Single PC 9
2.2.2.4 To Connect the DCU to a
LAN with a DHCP server 9
2.2.2.5 Connection to a LAN using
Fixed IP Addresses 10
2.2.2.6 Factory Defaults for the
DCU 10
2.2.2.7 IP Address Conflict 10
2.3 Web Server Configuration 10
2.3.1 DCU 11
2.3.2 RIO 11
2.3.3 SDU 11
2.3.4 MK-14 11
2.3.5 Upload Wallpaper 11
2.3.6 Versions 11
2.3.7 Troubleshooting 12
3 Main DCU Web Server Menu 12
3.1 Access Control 13
3.1.1 Access Control Levels 13
3.2 File 13
3.2.1 Load any File 13
3.2.1.1 Factory Default 13
3.2.1.2 User Uploaded 13
3.2.2 Delete Configuration File 13
3.2.3 Configuration Printout 13
3.2.4 Save File as 13
3.2.5 Save CANopen EDS-file 14
3.2.6 Upload to DCU 14
3.2.6.1 Firmware Update 14
3.2.6.2 Wallpaper 14
3.2.6.3 Configuration File Upload
14
3.3 I/O Configuration 14
3.4 User Interface 14
3.5 Start/Stop/Prelube 14
3.6 Engine Model 14
3.7 Service Interval 15
3.7.1 View Service Status 15
3.7.2 Configure 15
3.8 Communication 16
3.9 Miscellaneous 16
3.10 Language 17
4 I/O Configuration 17
4.1 Common I/O Configuration 17
4.1.1 Common Configuration for
Switch Channels 18
4.1.2 Common Configuration for
Analog Channels 21
4.2 Flexible I/O 24
4.3 Config Inputs 24
4.3.1 Engine Speed 24
4.3.2 Individual Speed Sensors 27
4.3.3 Engine Load 28
4.3.4 Transmission 28
4.3.4.1 Gear 28
4.3.4.2 Interlock/Indications 30
4.3.4.3 Clutch Slip
30
4.3.4.4 Clutch Temperature 32
Page 2 (99)