● 24VDC Supply
● 0VDC
● Switch Input
● Configurable Output
● 4-20mA sensor
● Voltage sensor
● 5V (#6)
● J1939#2 (#20 and #21)
Making changes to the flexible I/O configuration may result in damage to sensors
connected to the panel.
It is recommended to disconnect all sensors from the panel before making
changes.
After a flexible I/O channel has been defined it will appear in the respective menu
as enabled.
Eg. Terminal C1.1 has been defined as a “4-20mA” channel in the Flexible I/O section. It will
now be available in DCU Config Inputs 4-20mA.
4.3 Config Inputs
This is where the I/O input channels are configured, such as 4-20 mA, PT100 and switch
inputs.
4.3.1 Engine Speed
This is where engine speed sensors are configured, and the overspeed setpoint is set. The
majority of the configuration is synchronized with SDU.
This section is central to any installation. It provides the DCU with data required to
form an exact and reliable reading of the engine speed.
Page 25 (99)
