home / rio / rio 410 #1
Hardware Configuration
Enable for every RIO device if a warning for lost device should be given.
All I/O configuration of the RIO 410 is configured as normal channel configuration as
described earlier.
11 RP Configuration
The RP remote panel reads the engine configuration from the DCU panel, so no detailed
configuration is necessary.
In addition to the Power-On wizard, this chapter explains the Administration section of the
panel.
The screenshots in this section are mixed from RP 210E and RP 410E. The
functionality is however the same.
11.1 Power On Wizard
When power is first applied, the RP will perform a first power-on startup wizard.
Finish the steps to proceed with the installation.
Everything in the startup wizard can be changed in the panel menu later.
Page 90 (99)
