home / dcu / service interval / configure
Service Enabled
selects whether the service interval timer is active or not.
Next Service At
selects the hour counter value in the DCU for the first service. Note that this
happens only one time. This is useful if the first service should have a shorter interval than
the regular service interval.
Then Every
selects the service interval in hours. The DCU will indicate every time this
number of hours has elapsed.
Example
Current DCU hour counter is 123 hours.
● Next Service At: 150 hours
● Then every: 250 hours
The first service notification will appear in 27 hours, then every 250 hours. All hours are
engine running hours.
Pre-Warning Enabled
enables an information popup whenever the service is within 10 % of
the service interval.
3.8 Communication
Described in a separate chapter.
Page 16 (99)
