Distribute Start/Stop over SPN 3542
selects if the DCU should perform start/stop over
J1939.
Distribute Engine Control Mode
selects if the DCU should transmit
Speed/Torque Limit
Control
or not. If selected, the
Torque Limit
can be configured as well.
Distribute Engine Control Mode is only selectable for J1939:1.
Transmit Nominal Speed to Engines Desired Operating Speed
selects if the DCU should
transmit nominal speed (as configured for Engine Speed in the I/O configuration section)
over J1939.
Load Reduction / Load Reduction Override
Transmit Load Reduction
selects whether the DCU should transmit the configurable
Load
Reduction
value over J1939 in a load reduction situation.
Transmit Load Reduction Override
selects if the DCU should transmit load reduction override
over J1939 in a load reduction override situation.
Shutdown Override
Transmit Shutdown Override
selects if the DCU should transmit shutdown override over
J1939 in a shutdown override situation.
7.6.1.2 OEM Specific Configuration
This section is only available on the J1939:1 interface.
home / dcu / communication / j1939 configuration / j1939:1
/ oem specific configuration
ECM Configuration
ECM Type
selects the ECM type which the DCU is compatible with.
7.7 Communication Info
The page on the web interface contains useful information, especially when utilizing the
Modbus Alarm Log.
Carefully read through the register encoding and download the id-mapping files to be able to
decode the Modbus registers for the Modbus Alarm Log.
Page 76 (99)
