Only Acknowledge Visible Events
selects if the DCU can only acknowledge events that are
visible in the current view of the alarm list when performing an acknowledge all.
Disable Remote Acknowledge
can disable all types or remote acknowledge.
Enable DM11
selects if the DCU should perform a DM11 request when an acknowledge all
is performed.
Perform SDU Acknowledge over Modbus
is used to acknowledge SDU events over the SDU
Link when one or many SDU events are acknowledged in the DCU alarm list.
8.6 Operation Mode Configuration
Operation Mode Locked to Input
can be used to lock the operation mode to switch inputs, so
that any operator mode change is prohibited.
8.7 Event Log
The DCU has a built-in event log. The event log is the same as seen on the unit.
home / dcu / miscellaneous / event log
Everything
This displays a list of all events in chronological order.
Alarms Only
This displays a list of all warning, alarm and autostop (shutdown) events.
User Interaction Only
This displays a list of all button presses.
● Local Start/Stop Button
● Local Alarm List Button
● Service Complete Button
● Service Remind me later Button
Page 83 (99)
