home / dcu / i/o configuration / special / calc. fuel rate
Calculation Configuration
Enabled
sets if the calculated consumption should be enabled or not.
The Boost Pressure MUST be connected to 4-20 mA channel #2.
The channel is configured as any standard analog channel.
4.3.14.3 Calculated Engine Hours
If the engine hours are not sourced from the J1939 CAN bus, it is being calculated internally
by the DCU.
The appearance of the counter is configured in this dialog.
It is possible to set an alarm or other event connected to the engine hours.
4.3.14.4 Instantaneous Fuel Economy (DCU)
The DCU can be configured to calculate instantaneous fuel economy. In order to do so, fuel
rate and vessel speed need to be supplied to the DCU.
Page 46 (99)
