Select Installation Language
The selected language is used during the installation process only. The operator can change
language in the menu later.
Select Administrator Password
First, the RP asks for the default password. From the factory, this is 1234.
Next, the RP asks for the administrator password, which must be typed twice.
Select IP Address
The IP address shall be unique on the ethernet network.
The RP default address is 192.168.0.201.
If installing several panels in the same network, make sure they all have unique
addresses.
Select Panel Location
Select the location that best matches the location of the panel.
This information is used on other RP remote panels only.
DCU Connection / Scan for DCUs
Press the Search button to search for DCU engine panels in the network.
The RP 210E can connect to one DCU engine panel only.
The RP 220E can connect to two DCU engine panels.
The RP 410E can connect to eight DCU engine panels.
If the engine panel is not ready at this time, simply proceed. This step can be revisited in the
RP panel menu later.
Done
The RP startup wizard has now finished.
If no DCU panel has been attached, then the RP menu is displayed.
Page 91 (99)
