3.9 Miscellaneous
Described in a separate chapter.
3.10 Language
See Language description in the User Interface chapter.
This section is identical.
4 I/O Configuration
The I/O section holds menu items for input and output channels. Input channels are sensors
going in to the DCU (eg. Switch Input, 4-20 mA Input) and output channels are sensors
being controlled by the DCU (eg. 24 V Output, J1939 Output).
Always remember to press the
Submit
button after each change on the
configuration pages.
No changes are saved until this button is pressed.
4.1 Common I/O Configuration
Much of the configuration is common for all channels. This section describes the common
configuration.
Naming
Each channel can be configured with a custom name for all supported languages. The
naming of the channel in the panel is determined using the following prioritization.
1. Use channel custom name in selected language, if any.
2. Use channel custom name in English, if any.
3. Use channel default name in selected language.
Channel Use
Each channel can be individually configured for display on DCU, RP or both. In addition,
each channel can be individually configured for event.
The channel use configuration defines how the channel is configured according to the
following table.
Channel Use
DCU
RP
Display
Event
Display
Event
Not in use
Event
X
X
Page 17 (99)
