Show Gear indicator Instead Of All Ok
should only be set to yes if “ahead/astern” switches
are used.
This will enable an arrow in the upper right corner of the screen displaying gear position.
Pages
Show Page Name Popup
configures the page number and potential naming to be shown for
a brief period of time when switching pages.
Instruments
Industrial Style Instruments
will not show yellow or red indication unless active.
Green section on Gauges
will change the outer line of all gauges to green. If a warning or an
alarming threshold is set, this will still be red.
J1939 Display Switchover
is an option for displaying automatic switchover from J1939#1 to
J1939#2.
5.2 Pages
This is where the configuration of the different pages is done.
A Page is a screen on the panel. The DCU 410E panel can maximum have 40 instrument
screens, whereas the DCU 210E can maximum have 9 instrument screens.
● A
page
is built using one of several available
templates
.
● A
template
has several slot positions. A
slot
is simply an area on the screen.
● Each slot position can hold one
widget
type. A
widget
is for example a needle
instrument or a bar graph.
Each
widget
can be assigned a
signal
configured in the I/O section.
Widget Types
There are two different types of widgets amongst the available templates.
1.
Value Widgets
. Displays the value of a signal, for instance Engine Speed
2.
Event Widgets
. Displays the event status of a signal, for instance Warning.
Analog channels can be assigned to the following widgets.
Value Widgets
Event Widgets
Page 56 (99)
