home / dcu / i/o configuration / differential
General
Select
Diff Source Signal #1
and
Diff Source Signal #2
. The sensor unit must be the same
for the two selected source signals, for instance they must both be bar, and not one bar and
one psi.
After two channels with the same units have been selected, the differential signals are
configured as any standard analog channel.
4.3.13 Average
An average channel is a logical (not physical) channel, made up of the average of two or
more physical channels. The physical channels may be hardwired or from the J1939 CAN
bus.
home / dcu / i/o configuration / average
It is possible to configure deviation from average, as well as exclusion from the average
channel.
4.3.13.1 Average Signal
The average channel will output the average between the two or more source channels. The
sensor unit must be the same for the selected source signals, for instance they must both be
bar, and not one bar and one psi.
Page 41 (99)
