Auerswald COMfortel 1100 Operation And Configuration Instructions Download Page 98 | Manualshive

Page: 98 / 273

Auerswald COMfortel 1100 Operation And Configuration Instructions Download Page 98

98

COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10

Configuring and Managing the Telephone
Protection from Unauthorised Access
Configuring a Function Lock

2.

On the display, you will see (new, 1). Enter the user PIN and press the

softkey.

3.

On the display, you will see (new, 2). Renter the user PIN and press the

softkey.

Note: You can delete the user PIN by not entering a PIN in either menu, and
simply pressing the

softkey.

Configuring a Function Lock

The speed dialling function available in the menu can be blocked from unauthorised use. The
display of this restricted function in the selection list requires entering the corresponding PIN
after selecting additional at the end of the selection list.

The configuration can be carried out as follows:

• Via COMfortel Set

Configuring Function Lock via COMfortel Set

Requirements:
– An open configuration and the required PIN, if necessary

1.

Open the page Settings/functions > Restrictions.

2.

Click the Telephone menu functions tab.

3.

Select one of the following options in the Speed dialling list field.

Further steps:
– Save your configuration before closing.

No restrictions: The speed dialling function is not blocked.

Guests: Blocks the speed dialling function from guests.

users: Blocks the speed dialling function from guests and users.

users + SubAdmin: Blocks the speed dialling function from guests,
users and sub-administrators.

«
...
96
97
98
99
100
...
»

Summary of Contents for COMfortel 1100


















































































































































































































































































Reviews:

No comments